Proceedings of the III ISSCIMM
The III International Symposium on Science, Innovation and Modeling in Materials was held in a hybrid form from the 21st to the 25th of November 2022 in a joint event between professors and students of the Graduate Program in Science, Innovation and Modeling in Materials (PROCIMM) .
The submitted abstracts had as main themes: biomaterials, waste recycling and sustainability, properties of modified concretes, corrosion of metallic alloys, 3D printing, synthesis and characterization of materials and applied engineering topics and were evaluated by a scientific technical committee, composed of professors and researchers in the respective areas.
In this edition, 34 papers were approved, which can be read in full at the link below.
Feedback
-
O III ISSCIMM ocorreu nos dias 21 a 25 de novembro de 2022
de maneira híbrida (online e presencial) -
Como destaque da edição, tivemos apresentação de trabalhos pela primeira vez.
-
Dessa forma, foram realizadas as frequências associadas ao
feedback das palestras, minicursos e sessões técnicas. -
Após coleta e refino dos dados, estes foram compilados e apresentados como forma de registro.
​
CONFIRA:
The ISSCIMM is an International Symposium promoted by the Postgraduate Program in Science, Innovation and Modeling in Materials (PROCIMM). This is the third edition of the event, which will take place on a blended basis (in person and online activities).
The objective of the ISSCIMM is to bring together renowned researchers and professionals, national and international, in the area of Materials Science and Engineering and the like, to expose their lines of investigation and professional experiences through lectures, mini-courses and round tables. We will also have technical sessions with the presentation of works in oral and poster modalities.
It is worth highlighting the success and evolution of the ISSCIMM in previous editions. There were 28 lectures by national (19) and international (9) researchers and professionals, and 515 certificates were issued. For more information about the speakers, topics of the lectures and to watch the lectures, access the annexes and check the our youtube channel for access to lectures.
​
You are our guest, come join as a listener or presenter, it's completely free.
​
​
​
Pay attention to the submission deadline!
About the event
Registrations
The III ISSCIMM is completely free, including for paper submission. Register now*.
*Our places are limited.
Modality
We will have in-person mini-courses, lectures and technical sessions in the face-to-face and remote modality. Choose your mode of participation in the registration.
Certificates
Participation certificates will be issued in the listener and presenter modalities.
THIS EDITION HIGHLIGHTS
Ours
speakers
PhD. Glória Maria Vinhas
"Antimicrobial active packaging as new sustainable and environmentally friendly approaches"
She holds a degree in Chemical Engineering from the Federal University of Pernambuco, a master's degree in Biotechnology of Bioactive Products from the Federal University of Pernambuco and a PhD in Chemistry, polymer area, from the Federal University of Pernambuco. She is currently an Associate Professor at the Department of Chemical Engineering at the Federal University of Pernambuco, member of the board of the Food Engineering Course at the Federal University of Pernambuco. She is a permanent member of the Graduate Program in Chemical Engineering and the Graduate Program in Materials Science at the Federal University of Pernambuco. She has experience in the field of Polymers with emphasis on Biotechnological processes in the production of biopolymers, Biodegradation, chemical modification in polymers, active and intelligent packaging, polysaccharides of microbial and plant origin.
PhD. Micheli de Souza Haack
"Characterization: Fourier Transform Infrered Spectroscopy, Differential Scanning Calorimetry and Thermogravimetry"
Bachelor in Chemistry and Physics from the Federal University of Rio Grande do Sul. Currently studying for a Masters in Engineering/Science and Materials Technology at PPGE3M at the Federal University of Rio Grande do Sul. Has experience in Analytical Chemistry in the area of Materials Engineering, with emphasis on Polymers. Technical development scholarship at the Laboratory of Polymeric Materials (LAPOL) of the Federal University of Rio Grande do Sul. Since 2000, she has been performing activities related to the analysis and characterization of materials, with emphasis on Infrared spectroscopy, Raman spectroscopy and Thermal analysis (TGA and DSC). Participated in the implementation of the quality management system at LAPOL, responsible for document control and infrared spectroscopy tests, recognized by Rede Metrológica/RS.
PhD. Fernanda Albana Marchesini
"Synthesis and Characterization of Catalysts for Environmental Applications"
Academic researcher at the National Council for Scientific and Technical Research and Professor at the Universidad Nacional del Litoral, PhD in Chemistry at the Facultad de Ingenieria Quimica - Universidad Nacional del Litoral and specialist in Occupational Health and Safety at the Universidad Tecnologica Nacional Santa Fe. Its specialty is catalysis and research topic, advanced catalytic and electrocatalytic methods for removing contaminants (inorganic and emerging organic) present in water intended for consumption and industrial waste.
PhD. Altair Soria Pereira
"X-Ray Diffraction - Theory and Applications"
Professor at the Department of Materials Engineering and at the Graduate Program in Materials Science at the Federal University of Rio Grande do Sul - UFRGS, in Porto Alegre, Brazil. As a senior researcher at the Research Group on High Pressure and Advanced Materials at the Institute of Physics at UFRGS, his main interest is in Materials Physics, especially in the experimental study of materials under extreme pressure conditions, including structural phase transitions, synthesis and sintering of high hardness materials, high pressure instrumentation (small and large volume chambers), X-ray diffraction analysis, Raman spectroscopy and evaluation of mechanical properties. He graduated in Physics and Electrical Engineering and received the title of Master in Physics and Doctor of Science from UFRGS. He held a post-doctorate at the Laboratoire de Physico-Chimie des Matériaux of the CNRS and, between 2005 and 2007, he carried out activities as a visiting professor at the University of Montpellier 2. He is currently a member of the Structuring Teaching Centers of the Materials Engineering courses and Engineering Physics.
PhD. Rodrigo Sanchotene Silva
"Corrosion and Conducting Polymers: Mechanisms and Applications."
Graduated in Bioprocess Engineering and Biotechnology from the State University of Rio Grande do Sul (UERGS), Master's and Ph. Graduate Program in Mining, Metallurgical and Materials Engineering (PPGE3M) at the Federal University of Rio Grande do Sul (UFRGS). He is currently an adjunct professor at UERGS and Lead Researcher at the Materials Recovery and Treatment Laboratory - LRTM/UERGS, where he works in research lines in the areas of materials, chemical, energy and environmental engineering, such as: biofuel production, water treatment wastewater and solid waste, bioremediation, bioprospecting, production of protective coatings, electrochemistry and paints against corrosion. Professional experience in the area of Environmental Licensing and Environmental Impact Studies.
PhD. Jordi Carrillo Abad
"Electrochemical methods for characterization of materials and interfaces"
Researcher with professional experience in green electrochemical engineering, focused on the areas of metal resource recovery, circular economy and wastewater treatment. Actively participated in 8 regional and national R&D projects and 1 European project obtained in tenders and 2 contracts with private entities. As a researcher, he published 12 papers in peer-reviewed journals, 7 of them located in the first quartile of the JCR and one conference paper. Among them, there are 2 documents in collaboration with international researchers, Angela Kasper and Sara Rahimnejad. In addition, he participated in 20 international and national congresses, of which stand out the oral communications presented at ANQUE ICCE, Sevilla 2012, at the 11th ESEE, Prague 2017 and at the 25th ISE, Toledo 2019. Taught at undergraduate and masters levels. Finally, he recently participated in 3 science outreach events, 2 European Researcher's Night and a Week of Science.
PhD. Manuel César Martí Calatayud
"Electrochemical methods for characterizing materials and interfaces"
He holds a degree in Chemical Engineering from the Universitat Politècnica de València (UPV), a master's degree from the Technische Universität Berlin and Universitat Politècnica de València (UPV), a doctorate from the Universitat Politècnica de València ( UPV) and RWTH Aachen University and postdoctoral (2015-2018) also by RWTH Aachen University. He is currently an R&D Researcher at the Universitat Politècnica de València (UPV) in Valencia/Spain. He has worked on wastewater treatment and water recovery technologies, optimization of membrane bioreactors in terms of scale reduction and effluent quality, and application of membrane processes for desalination. Studied the feasibility of treating industrial effluents using electromembrane processes; surface modification of ion-conducting polymers through the deposition of thin films of LbL polyelectrolytes; the electrochemical behavior of modified membranes and the synthesis of ceramic ion exchange membranes. Researched on polymeric electrolytes and the transport of different ions through their structure.
PhD. Tiago Bender Wermuth
"Synthesis and Characterization of Nanostructures"
PhD in Engineering in the Materials Science and Technology concentration area by the Graduate Program in Mining, Metallurgical and Materials Engineering (PPGE3M) at the Federal University of Rio Grande do Sul - UFRGS (2019). He is a member of the Laboratory of Ceramic Materials (LACER) - UFRGS, where he conducts research on ceramic materials, ferroelectric ceramics, perovskites and materials for environmental applications. Master in Engineering in the area of Science and Technology of Materials from the Federal University of Rio Grande do Sul - UFRGS (2015). Graduated in Environmental Engineering from the University of Santa Cruz do Sul (2013). Worked as a Scientific Initiation scholarship holder focusing on the environmental area with the themes: effluent treatment, recycling of materials and obtaining new products for technological applications.
PhD. Sabrina Arcaro
"Material Characterization Techniques: Structural Analysis"
Professor and Researcher in the Graduate Program in Materials Science and Engineering and professor in Eng. Materials, Eng. Chemistry, Environmental Eng, Eng. Production and Pharmacy at the University of the Extreme South of Santa Catarina. He holds a Post-Doctorate in Mining, Metallurgical and Materials Engineering from the Federal University of Rio Grande do Sul. PhD in Materials Science and Engineering from the Federal University of Santa Catarina with an internship abroad at the Instituto de Cerámica y Vidrio (Madrid - Spain). Master in Materials Science and Engineering from the Federal University of Santa Catarina. Graduated in Ceramic Technology from the University of Extremo Sul Catarinense. Develops research focused on Biomaterials, glass-ceramic materials, colloidal processing of ceramic suspensions, synthesis of nanostructures, carbon nanotubes, spinels, nanostructured composites, porous materials and reuse/recycling of solid waste from different sources, for different applications.
PhD. Jaqueline Benvenuti
"Sustainable alternative materials in the synthesis of biosorbents for environmental applications"
PhD in Chemical Engineering from the Federal University of Rio Grande do Sul, with a period of Sandwich Doctorate Abroad at Escola dEnginyeria dIgualada (Campus Universitari Igualada - UdL) - Spain. He completed a post-doctoral internship at LAREX (Recycling, Waste Treatment and Extraction Laboratory) - EMBRAPII Tecnogreen Unit of the Chemical Engineering Department of the Polytechnic School of the University of São Paulo. She has worked mainly on the following topics: organic-inorganic hybrid materials, silica, sol-gel process, industrial effluent treatment, leather, agro-industrial and petrochemical solid waste, spent catalysts, electronic waste, analytical techniques for material characterization, hydrometallurgy and adsorption.
PhD. Paula Aliprandini
"Sustainable alternative materials in the synthesis of biosorbents for environmental applications"
Graduated in Materials Engineer from the Federal University of Rio Grande do Sul – UFRGS, Master and Doctor in Chemical Engineering from the University of São Paulo – USP. Developed research on processes of recovery of metals from mining residues and in the development of a methodology for the treatment of effluents from artisanal gold mining, focusing on the removal of mercury, cyanide and the respective complexes formed present in the effluents of this mining. using biosorbents. She currently works at Concremat Engenharia e Tecnologia as a Control Analyst supporting Vale in the repair project of the area affected by the dam failure in Brumadinho - MG.
Schedule
11/21/2022
Start of the III ISSCIMM
08am-09pm | Accreditation
​
08h30am-09am | Opening
​
09am-12:30am | Minicourse 01 - Synthesis and Characterization of Nanostructures.
| PhD. Tiago Bender Wermuth (UNESC)
​
​
02pm-05pm | Minicourse 02 - Materials Characterization Techniques: Structural Analysis.
​11/22/2022
Second day of the III ISSCIMM
08am-09am | Accreditation
​
9am-12:30pm | Minicourse 03 - Sustainable alternative materials in the synthesis of biosorbents for environmental applications.
| PhD. Jaqueline Benvenuti (ARCADIS)
| PhD. Paula Aliprandini (CONCREMAT/VALE)
2pm-4pm | Minicourse 03 - Sustainable alternative materials in the synthesis of biosorbents for environmental applications.
| PhD. Jaqueline Benvenuti (ARCADIS)
| PhD. Paula Aliprandini (CONCREMAT/VALE)
​
4pm-5pm | Round table
11/24/2022
Fourth day of the III ISSCIMM
09am-10am | Technical Session
10am-11am | Technical Session
​
11am-12pm | Lecture 1 - Electrochemical methods for characterization of materials and interfaces.
| PhD. Manuel César Martí Calatayud
​
1pm-2pm | Lecture 2 - Antimicrobial active packaging as new sustainable and environmentally correct approaches.
​
2pm-3pm | Lecture 3 - Materials Characterization: Infrared Spectroscopy (FTIR) and Thermal Analysis
11/25/2022
Ending of the III ISSCIMM
09am-10am | Technical Session
​
10am-11am | Technical Session
​
11am-12pm | Technical Session
​
1pm-2pm | Lecture 4 - Synthesis and characterization of catalysts for environmental applications.
| PhD. Fernanda Albana Marchesini
​
2pm-3pm | Lecture 5 - X-ray diffraction - Theory and applications.
| PhD. Altair Soria Pereira
​
3pm-4pm | Lecture 6 - Corrosion and conductive polymers: mechanisms and applications.
| PhD. Rodrigo Sanchotene Silva
THE
TEAM
Organizing Team
- Prof. Marcelo Tramontin
- Prof. Tatiana Benvenuti
- Prof. Vera Rosa Capelossi
- Dr. Lhaira Souza Barreto
- Alan Oliveira Goulart
- Biancardy Lima Silva
- Claudio Renato Simoes de Jesus
- Gilcelli Nascimento de Oliveira
- Heverton Santana Barbosa
- Iago Magella Fernandes Costa Rossi e Silva
- Luis Gustavo Costa Nimo Santos
- Marcos Alexandre Rodrigues Oliveira
- Mariana Cordeiro Magalhaes
- Murilo Carlos Novais
- Raquel Viana Pinto Leal
- Vitor Lucas Pereira dos Santos
Scientific Technical Committee
-Tacia Veloso (UFSB)
-Vanessa de Freitas Cunha Lins (UFMG)
-Fernando Cotting (UFMG)
-Lhaira Souza Barreto (UESC)
-Daiana Maffessoni (UERGS)
-Fernanda Miranda Zoppas (UNL)
-Nicolás Sacco (UNL) - Argentina
-Ruan Carlos de Araujo Moura (UESC)
-Raimundo Alves Sobrinho (UESC)
-Márcio Barbalho Dantas Bezerra (UESC)
-Brunela Pereira da Silva (UFMG)
-Fernanda Martins Queiroz (SENAI-SP)
Universidade Estadual de Santa Cruz (UESC)
COMPLETE ADDRESS
Campus Soane Nazaré de Andrade, Rodovia Jorge Amado, Km 16, district Salobrinho
CEP 45662-900. Ilhéus-Bahia
Phone: (073) 3680-5200
Fax: (073) 3680-5230
Fax from the Rectory: (73) 3689-1126
The State University of Santa Cruz (UESC) is located in Ilhéus, State of Bahia, at km 16 of Highway BR-415. It was created by the merger and state ownership of a group of private colleges that emerged in the south of Bahia in the 1960s.
Currently, UESC has a grade 4 in the General Course Index (IGC), on a scale from 1 to 5, according to the ranking of the Ministry of Education (MEC).
The UESC makes itself with its 48 years of history, therefore, the great irradiating center of culture and, more than that, of hope for the regional development of the whole south of Bahia.
The State University of Santa Cruz (UESC) is located in Ilhéus, State of Bahia, at km 16 of Highway BR-415. It was created by the merger and state ownership of a group of private colleges that emerged in the south of Bahia in the 1960s.
Ilhéus is located in the south of the state, approximately 300km from Salvador. It is an important tourist center in the region, enchanting everyone for its beaches, especially those in the Olivença district, coveted by nearby surfers and having the largest coast in Bahia.
Like the entire South Coast of Bahia, Ilhéus has a humid tropical climate all year round. Its temperatures are high and present an annual average of 24.7ºC. Its beaches are sought after for their calm waters and mild temperatures and are, above all, a breeding ground for humpback whales and spawning sea turtles.
And to finish off the day, how about the most famous sunset in the south of Bahia in the bay, in Sapetinga?
Ilhéus is located in the south of the state, approximately 300km from Salvador. It is an important tourist center in the region, enchanting everyone for its beaches, especially those in the Olivença district, coveted by nearby surfers and having the largest coast in Bahia.
About PROCIMM
The Postgraduate program stricto sensu, Academic Master's Degree in Science, Innovation and Modeling in Materials at the Universidade Estadual de Santa Cruz (PROCIMM UESC) has existed since 2010 and is structured around the concentration in Materials Science and Technology.
​
​
We have two lines of research: Synthesis and Characterization of Materials and Modeling and Simulation in Materials.
The first line of research aims to characterize and modify materials, seeking to improve their various properties, whether physical, chemical, electrical, optical and mechanical.
The second line of research seeks the development and application of mathematical models, numerical methods and computational techniques to solve problems related to the characterization, development and applications of materials.
Email: pgmaterials@uesc.br
Phone: (73) 3680-5506 (Collegiate)
Opening hours: 8:00 am - 11:30 am and 1:30 pm - 3:30 pm
​
Address:
Postgraduate Program in Science Innovation and Modeling in Materials
Max de Menezes Pavilion - 1st floor
Santa Cruz State University
Jorge Amado Highway, km 16, district Salobrinho
Ilheus, Bahia
CEP 45662-900
​